Product introduction:
The Bluetooth music receiver (hands-free) is a high-tech wireless product that can receive music from a mobile phone or a Bluetooth-enabled transmitter. This music receiver can be used with almost all audio receivers with input plugs, including car devices. You can listen to the music received from your smart phone and MP3 in your home speaker or car audio system. Enjoy car music, call solutions, use your smart phone to make calls and enjoy music through the car audio. With a single touch, you can make hands-free calls, enjoy music stored on the phone, and even play Internet radio. The product has an embedded echo cancellation microphone, which can easily switch between music and phone calls with just one button.
Technical Parameters:
Bluetooth V3.0+EDR, long transmission distance 10m Support Bluetooth hands-free call function Support Bluetooth A2DP stereo
Frequency: 2.4GHz
Pass the certification
3.5mm stereo input jack Sleep mode, energy saving
Power: Use mini USB cable to charge
Working hours: up to 4 hours
Bluetooth music receiver USB cable Manual Recharge
Use one end of the provided USB cable to connect to the micro-USB input port of this Bluetooth music receiver
Connect the other end of the USB cable to your computer, notebook or USB power converter. At this time, the LED light of the Bluetooth music receiver turns red, indicating that it is charging.
When the charging is over, the red LED light will go out, and it can provide up to 8 hours of playing time when fully charged
pair:
Enter the pairing mode, press and hold the switch button for 5 seconds until the red and blue LED lights flash at the same time
Find this Bluetooth music receiver on your mobile phone or related transmitter
At this time, the device is paired and connected. After the connection is successful, the LED light of the Bluetooth music receiver turns blue and flashes slowly
For some devices, the pairing password is required, please enter “0000”
Once the pairing is successful, the device can be powered off, and there is no need to re-pair it next time you connect
If paired:
1. Turn on: Press and hold the switch button on the Bluetooth music receiver for 3 seconds until the LED light turns blue and flashes to complete the boot
2. Shut down: Press and hold the switch button for 5 seconds, at this time the red LED light will be on and then turn off.
Note: Please read the instruction manual of your transmitter or mobile phone carefully to find out how to use its Bluetooth wireless technology;
If you want to use this Bluetooth music receiver to connect to other mobile phones or transmitters, you must re-pair.
play music:
Use the provided audio cable and connector to connect this Bluetooth music receiver to your home audio or car stereo device
Please confirm that the transmitter (Bluetooth audio receiver, mobile phone, or other related devices) has been turned on and paired with the Bluetooth music receiver, and the device is within 10m
Play music at this time, and the music will be wirelessly transmitted to the Bluetooth music receiver via Bluetooth
Note: If you cannot listen to music:
Please make sure your stereo system is connected to the Bluetooth music receiver
Check to make sure that your audio volume is not turned down or muted.
Handsfree:
When your mobile phone uses a Bluetooth microphone by default, hands-free calls can be realized through the built-in MIC when a phone is connected
When a mobile phone calls, press the power button once to answer the voice call
After the call is completed, it will automatically switch to the previous state of the phone
Indicator light shows:
Pair or establish a connection: red and blue LED lights flash at the same time
Once the connection is successful and playing: the blue LED light flashes once every 3 seconds
Sleep mode: blue LED light flashes once every 5 seconds
Charging: the red LED light is on
Charging and connected: the red LED light flashes slowly
Troubleshooting:
The connection of the Bluetooth music receiver is established on the basis of the completion of the pairing. The connection interruption may be due to the following reasons:
The swordsman of the equipment is more than 33 feet (10 meters) away, or there are other obstacles in the middle (such as walls, furniture, etc.)
One or both of them are turned off, or it may be because of no electricity
The connection is not made within the specified time, the device is in sleep mode or the power is turned off. Turn off and turn on the device to reconnect, follow the steps below:
- Restart the music receiver and sender
- Reconnect after restarting, pairing
- Power up the music receiver and transmitter again